|Place of Origin:||Hanoi, Vietnam|
|Minimum Order Quantity:||1 Piece|
|Packaging Details:||Packaging Details: 1 or 4PCS /Plastic tray, 1PC/Gift box Delivery Detail: Shipped in 1 days after payment|
|Supply Ability:||3000 Piece per Month|
|Data Rate:||40Gb/s||Operating Temperature:||0°c~70°c|
|Power Supply:||3.3V||Output Power:||-4~+5.0 DBm|
|Wavelength:||850/900nm||Compatible:||Cisco Arista Juniper Dell Extreme HW H3C Ciena Mellanox|
40Gb/S Qsfp Optical Transceiver,
100m Qsfp Optical Transceiver,
VCSEL Multimode QSFP+ Transceiver
Bi-Di,40Gb/s 100m QSFP+, Duplex LC Hot Pluggable, 850/900nm, VCSEL, Multimode
Compliant to the 40GbE XLPPI electrical specification per IEEE 802.3ba-2010
Compliant to QSFP+ SFF-8436 Specification
Aggregate bandwidth of > 40Gbps
Operates at 10.3125 Gbps per electrical channel with 64b/66b encoded data
QSFP MSA compliant
Capable of over 100m transmission on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
Single +3.3V power supply operating
Without digital diagnostic functions
Temperature range 0°C to 70°C
RoHS Compliant Part
Utilizes a standard LC duplex fiber cable allowing reuse of existing cable infrastructure
40 Gigabit Ethernet interconnects
Datacom/Telecom switch & router connections
Data aggregation and backplane applications
Proprietary protocol and density applications
The transceiver internally multiplexes an XLPPI 4x10G interface into two 20Gb/s electrical channels, transmitting and receiving each optically over one simplex LC fiber using bi-directional optics. This results in an aggregate bandwidth of 40Gbps into a duplex LC cable. This allows reuse of the installed LC duplex cabling infrastructure for 40GbE application. Link distances up to 100 m using OM3 and 150m using OM4 optical fiber are supported. These modules are de- signed to operate over multimode fiber systems using a nominal wavelength of 850nm on one end and 900nm on the other end. The electrical interface uses a 38 contact QSFP+ type edge connector. The optical interface uses a conventional LC duplex connector.
4. Transceiver Block Diagram
5. Optical Parameters(TOP = 0 to 70 °C, VCC = 3.0 to 3.6 Volts)
|Optical Wavelength CH1||λ||832||850||868||nm|
|Optical Wavelength CH2||λ||882||900||918||nm|
|RMS Spectral Width||Pm||0.5||0.65||nm|
|Average Optical Power per Channel||Pavg||-4||-2.5||+5.0||dBm|
|Laser Off Power Per Channel||Poff||-30||dBm|
|Optical Extinction Ratio||ER||3.5||dB|
|Relative Intensity Noise||Rin||-128||dB/HZ||1|
|Optical Return Loss Tolerance||12||dB|
|Optical Center Wavelength CH1||λ||882||900||918||nm|
|Optical Center Wavelength CH2||λ||832||850||868||nm|
|Receiver Sensitivity per Channel||R||-6||dBm|
|Maximum Input Power||PMAX||+0.5||dBm|
6. About us
Moduleland locating in Hanoi Vietnam, is a factory based manufacturer of optical transceivers covering various types widely applied to WAN, LAN, SAN, Fiber Channel, FTTX, etc.
Five years Warranty, three monthes free exchange and one year free repairing.
2. OEM, ODM are welcome.
3. Free sample will be provided.
Free samples under a certain value are available,with freight cost collect.
4. Any Inquire is welcome.
Any inquire will be replied within 24 hours.
5. After-sales service.
a. From the beginning of production till the successful delivery, we will track on time and post you the status.
b. When the goods arrived, if you have question after inspection, please feel free to contact us, we'll provide solution.
Q: What payment terms do you accept?
A: T/T,L/C at sight,Western Union are acceptable. Other payment terms are negotiable.
Q: what is the lead time?
A: For standard products,we keep enough stock,cqn ship out in 1-3 days after PO confirmation.For big quantity and special products,Please check lead time with our sales representative.
Q: What are the shipping ways can you offer?
A: For small quantity we ship by Express like DHL,FedEX,TNT,UPS, EMS etc. For large quantity we can use airshipment ot other appointed method by clients.
Contact Person: sales