|Place of Origin:||Hanoi, Vietnam|
|Certification:||CE RoHS FCC TUV|
|Minimum Order Quantity:||1 Piece|
|Packaging Details:||Packaging Details: 10 or 20PCS /Plastic tray, 1PC/Gift box Delivery Detail: Shipped in 1 days after payment|
|Supply Ability:||1000 Piece/Pieces per Month|
|Power Supply:||+3.3V||Operating Temperature:||0°C To 70°C|
10g xfp module,
xfp 10g er
Hot pluggable 30 pin connector
Support multi protocol from 9.95Gb/s to 11.3Gb/s
Compliant with XFP MSA
Built-in 1270/1330 WDM
Transmission distance of 20km over single mode fiber
1270nm or 1330nm CWDM DFB Laser.
Duplex LC connector
2-wire interface for management and diagnostic monitor
XFI electrical interface with AC coupling
Single power supply voltages : +3.3V
Temperature range 0°C to 70°C
Power dissipation: <1.5W
RoHS Compliant Part
1200-Mx-SN-I 10G Fibre Channel
Other optical links
3. Electrical Characteristics (TOP = -40 to 85 °C)
|Module total power||P||2||W|
|Input differential impedance||Rin||100||Ω||1|
|Differential data input swing||Vin,pp||150||820||mV|
|Transmit Disable Voltage||VD||2.0||Vcc||V|
|Transmit Enable Voltage||VEN||GND||GND+ 0.8||V|
|Transmit Disable Assert Time||T_off||100||ms|
|Tx Enable Assert Time||T_on||100||ms|
|Differential data output swing||Vout,pp||300||500||850||mV|
|Data output rise time||tr||35||ps||2|
|Data output fall time||tf||35||ps||2|
|LOS Fault||VLOS fault||Vcc – 0.5||VccHOST||V||3|
|LOS Normal||VLOS norm||GND||GND+0.5||V||3|
|Power Supply Rejection||PSR||See Note 4 below||4|
1. After internal AC coupling.
2. 20 – 80 %
3. Loss of Signal is open collector to be pulled up with a 4.7k – 10kohm resistor to 3.15 – 3.6V. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
4. Per Section 2.7.1. in the XFP MSA Specification.
Moduleland locating in Hanoi Vietnam, is a factory based manufacturer of optical transceivers covering various types widely applied to WAN, LAN, SAN, Fiber Channel, FTTX, etc.
Five years Warranty, three monthes free exchange and one year free repairing.
2. OEM, ODM are welcome.
3. Free sample will be provided.
Free samples under a certain value are available,with freight cost collect.
4. Any Inquire is welcome.
Any inquire will be replied within 24 hours.
5. After-sales service.
a. From the beginning of production till the successful delivery, we will track on time and post you the status.
b. When the goods arrived, if you have question after inspection, please feel free to contact us, we'll provide solution.
Q: What payment terms do you accept?
A: T/T,L/C at sight,Western Union are acceptable. Other payment terms are negotiable.
Q: what is the lead time?
A: For standard products,we keep enough stock,cqn ship out in 1-3 days after PO confirmation.For big quantity and special products,Please check lead time with our sales representative.
Q: What are the shipping ways can you offer?
A: For small quantity we ship by Express like DHL,FedEX,TNT,UPS, EMS etc. For large quantity we can use airshipment ot other appointed method by clients.
Q: How to place an order?
A: 1> Confirm order details with our sales representatives.
2> Proforma Invoice confirmed, the order will be arranged upon receipt of your payment.
3> Confirm shipping details and dispatch goods, tracking number will be sent to you promptly after the shipment is picked up.
4> We will help to track your goods until you receive them safely.
Contact Person: sales